Registering A Handset To A Base Unit - Panasonic KX-TG8070E Quick Manual

TG8070_TG8090E(e)_QG.fm Page 6 Wednesday, May 30, 2007 11:23 AM
Frequently asked questions
Question
What is a PIN?
What do I need to do to display caller
information?

Registering a handset to a base unit

The supplied handset and base unit are pre-registered. If for some reason the handset is not
registered to the base unit, register the handset.
1
Press and hold {x} on the base unit for
about 5 seconds until a beep is heard.
L If all registered handsets start ringing,
press {x} to stop, then repeat this step.
L After a beep is heard, the rest of this
procedure must be completed within 1
minute.
2
{MENU} (right soft key) i r i {OK}
3
{^}/{V}: "Registration" i {OK}
4
{^}/{V}: "Register Handset" i {OK}
5
{^}/{V}: Select a base unit number. i
{OK}
6
"Enter PIN" is displayed. Enter the base
unit PIN (default: "0000"). i {OK}
Cause & solution
L The PIN is a 4-digit number that must be entered in order
to change certain base unit settings. The default PIN is
"0000".
L You need to subscribe to Caller ID service. Consult your
service provider/telephone company for details.
{x}
KX-TG8070
– 6 –
{x}
KX-TG8090/KX-TG8092/
KX-TG8093
{MENU}/{OK}
{OK}