Advertisement
TG7100_7120FX(e-e)_QG.fm Page 5 Wednesday, March 29, 2006 7:41 PM
Question
How long is the battery
operating time?
Can I keep the handset on the
base unit or charger when I
am not using it?
When should I replace the
batteries?
What is a PIN?
What do I need to do to
display caller information?
Cause & solution
When you are using fully-charged Ni-MH batteries
(included batteries);
In continuous use: 17 hours max.
In continuous standby mode: 180 hours max.
L It is normal for batteries not to reach full capacity at the
initial charge. Maximum battery performance is reached
after a few complete cycles of charge/discharge (use).
L Actual battery performance depends on a combination of
how often the handset is in use and how often it is not in
use (standby).
L Even after the handset is fully charged, the handset can
be left on the base unit or charger without any ill effect on
the batteries.
If the batteries are fully charged until 1 is displayed, but
3 is displayed after a few calls, replace the batteries with
new ones.
The PIN is a 4-digit number that must be entered in order
to change certain base unit settings. The default PIN is
"0000".
L You need to subscribe to Caller ID service. Consult your
service provider/telephone company for details.
L The message "You must first subscribe to
Caller ID." will be displayed until you receive caller
information after subscribing to Caller ID service.
–
–
5
Advertisement
