Konica Minolta bizhub C30P Reference Manual page 144

Parameter
Status request
timeout
Send request
timeout
Port Settings
126 Adding a Crown Port After Installing Crown Print Monitor+
Default Setting Description
10 seconds
60 minutes
9100
Specify the length of time to wait for an
answer from the printer until Crown Print
Monitor+ notifies the print manager that
there is no response from the printer.
Specify the length of time to wait for the
print job to be sent until Crown Print Moni-
tor+ returns the command to the Microsoft
Print Spooler.
If the job has been sent through a
Windows 2000/NT4 server and the
time specified with the timer is
exceeded, the print job is
automatically stopped and deleted
from the system.
If the job has been sent through a
workstation and the time specified
with the timer is exceeded, the
Windows XP/2000/NT4 Print
Spooler appears and displays a
message, requesting confirmation
to attempt answering again or to
cancel the operation. Whether or
not there is an answer, the print job
is stopped and deleted from the
system.
Select 9100.
Port 35 is not supported by this
printer.