Intercom; Making Intercom Calls - Panasonic KX-TG5230C Operating Instructions Manual

Intercom

Intercom calls can be made between a handset and the base unit, and between two
handsets (when the system has two or more handsets, p. 3). You can page all
handsets at once from the base unit, and announce the page to all handsets (Voice
Paging, p. 45).
Page the desired unit(s) by entering the extension number, shown in the top right of
each handset's display. The base unit's extension number is 0.

Making Intercom Calls

From
Handset
1
Press [HOLD/INTERCOM].
2
To page the base unit, press [0].
To page another handset, press its extension
number ([1] to [4]).
• The paged unit will ring for 1 minute.
• To stop paging, press [OFF].
3
When the paged party answers, begin
speaking.
• You can switch to the speaker by pressing [s].
To switch back to the receiver, press [C].
4
To disconnect the intercom, press [OFF].
From
Base Unit
Using this feature, you can also locate a misplaced handset.
1
Press [LOCATOR/INTERCOM/TRANSFER].
• The LOCATOR/INTERCOM/TRANSFER and SP-PHONE indicators light.
2
To page all handsets, press [0].
To page a specific handset, press its extension number [1] ( ) to [4]
( ).
• The handset(s) will ring for 1 minute.
• To stop paging, press [SP-PHONE] or [LOCATOR/INTERCOM/TRANSFER].
3
When the paged party answers, speak into the MIC.
4
To disconnect the intercom, press [SP-PHONE] or [LOCATOR/
INTERCOM/TRANSFER].
• The indicator lights go out.
Press extension#
to call
1-4=Handset
0=Base
e.g. Calling Base unit
Calling Base
e.g. Calling Handset 2
Calling HS[2]
e.g. Intercom between
Handset 1 & Base unit
Intercom
00-00-05
D01
43