Bluetooth ® Operations - Panasonic SC-NE1 Operating Instructions Manual

Bluetooth
®
By using the Bluetooth
wirelessly.
≥ Refer to the operating instructions of the Bluetooth
Pairing Bluetooth
Preparation
≥ Turn on the Bluetooth
place the device near this unit.
≥ If this unit is already connected to a Bluetooth
device, disconnect it.
1
Press [ , AUX] to select "BLUETOOTH".
≥ If "PAIRING" is indicated on the display, go to step 3.
2
Press [PLAY MENU] to select "NEW DEV." and
then press [OK].
{. "PAIRING" is indicated on the display.
3
Select "SC-NE1" from the Bluetooth
Bluetooth menu.
®
4
Start play on the Bluetooth
≥ If prompted for the passkey, input "0000".
≥ You can register up to 8 devices with this unit. If a 9th device
is paired, the device that has not been used for the longest
time will be replaced.
Connecting a paired Bluetooth
device
Preparation
≥ Turn on the Bluetooth
place the device near this unit.
≥ If this unit is already connected to a Bluetooth
device, disconnect it.
1
Press [ , AUX] to select "BLUETOOTH".
{. "READY" is indicated on the display.
2
Select "SC-NE1" from the Bluetooth
Bluetooth menu.
®
{. The name of the connected device is indicated on the
display for 2 seconds.
3
Start play on the Bluetooth
≥ This unit can only be connected to one device at a time.
≥ When "BLUETOOTH" is selected as the source, this unit will
automatically try and connect to the last connected
Bluetooth device.
®
≥ The Bluetooth device will be disconnected if "AUX" is
®
selected as an audio source.
6
VQT4U48
operations
connection, you can listen to the sound from the Bluetooth
®
devices
®
feature of the device and
®
device's
®
device.
®
feature of the device and
®
device's
®
device.
®
device for details.
®
Bluetooth
You can change the transmission speed to prioritize
transmission quality or sound quality.
Preparation
®
≥ Press [
≥ If a Bluetooth
disconnect it.
1
Press [PLAY MENU] repeatedly to select
"LINK MODE".
2
Press [3, 4] to select the mode and then press
[OK].
MODE 1: Emphasis on connectivity
MODE 2: Emphasis on sound quality
≥ The default setting is "MODE 1".
Bluetooth
If the sound input level of the Bluetooth
is too low, change the input level setting.
®
Preparation
≥ Connect a Bluetooth
1
Press [PLAY MENU] repeatedly to select "INPUT
LEVEL".
® 2
Press [3, 4] to select the level and then press
[OK].
"LEVEL 0"
^---------------------------------------------------------J
≥ Select "LEVEL 0" if the sound is distorted.
≥ The default setting is "LEVEL 0".
Disconnecting a Bluetooth
1
While a Bluetooth
Press [PLAY MENU] to select "DISCONNECT?".
2
Press [3, 4] to select "OK? YES" and then press
[OK].
audio device from this unit
®
transmission mode
®
, AUX] to select "BLUETOOTH".
device is already connected,
®
input level
®
device.
®
"LEVEL +1" "LEVEL +2"
,. ,.
device is connected:
®
transmission
®
device
®