Example For Installing The Unit; Installing The Stands - Yamaha NS-WSW121 Quick Reference Manual

1 2 3 4 5

Example for installing the unit

This unit outputs sound beam as shown in the illustrations below. Install this unit where
there are no obstacles such as furniture obstructing the path of sound beams.
Otherwise, the desired surround sound effects may not be achieved.
• See pages 15 to 17 in the Owner's Manual for additional installation examples.
40° to 50°
8 a Installation
En
Parallel installation
Objects, such as furniture
Corner installation
Objects, such as
furniture

Installing the stands

If the center unit does not sit high enough, attach the stands supplied with the unit to
the center unit to increase the height at which it sits.
1
Remove the seal from the stand.
2
Align the protrusions on the stand with, and insert them into, the
holes on the rear panel.
Hole
Press firmly.
Seal
Protrusion