Specifications; General; Lcd Panel; Input/Output Terminals - JVC DT-E15L4 Instructions Manual

Hide thumbs Also See for DT-E15L4:
Table of Contents

Advertisement

Specifications

General

Model name
Type
Screen size
Aspect ratio
Horizontal/vertical frequency
(computer signal)
Compliant video signal format
Format
Audio output
Operating conditions
Power requirements
Rated current
External dimensions
(excluding protruding parts)
Weight
Accessories

LCD panel

Type
Effective screen size
Number of pixels displayed
Number of colors displayed
Viewing angle (TYP.)
Brightness (TYP.)
Contrast ratio (TYP.)

Input/output terminals

VIDEO
HDMI
COMPO./RGB
(R, G, B, HS, VS or Y, Pb/B-Y,
Pr/R-Y)
E. AUDIO HD/SD SDI (IN 1)
E. AUDIO HD/SD SDI (IN 2)
E. AUDIO HD/SD SDI
(SWITCHED OUT)
AUDIO (IN)
AUDIO (MONITOR OUT)
REMOTE (MAKE/TRIGGER)
REMOTE (RS-485)
REMOTE (RS-232C)
DT-E15L4
Multi format LCD monitor
Type 15 wide format
16:9
H:
31.469 kHz – 75.000 kHz
V:
49.990 Hz – 75.062 Hz
* Some signals within this frequency range may not be displayed ("Out of range" is displayed).
☞ "Available signals" on page 29
HD SDI:
BTA S-004C, SMPTE292M
SD SDI:
ITU-R BT.656:
SMPTE259M:
EMBEDDED AUDIO:
SMPTE299M, SMPTE272M
Internal speaker: 1.0 W
Operating temperature: 5°C – 35°C (41°F – 95°F)
Operating humidity: 20% – 80% (non-condensing)
(Slightly variable depending on ambient conditions for installation.)
AC 120 V / AC 220 – 240 V, 50 Hz/60 Hz
0.6 A (AC 120 V)
0.35 A (AC 220 – 240 V)
with the stand
Width: 373 mm (14 3/4˝)
Height: 270.1 mm (10 3/4˝)
Depth: 181 mm (7 1/4˝)
5.9 kg (13.0 lbs) (with the stand)
AC power cord x 1
15˝ wide, active matrix TFT
Width:
344 mm (13 9/16˝)
Height:
194 mm (7 11/16˝)
Diagonal: 395 mm (15 9/16˝)
1366 x 768
16.70 million
170° (Horizontally), 160° (Vertically)
300 cd/m
2
500:1
Input/output of composite signal:
HDMI signal input (compatible with HDCP):
Analog Component signal input/Analog RGB signal input:
Digital signal input (compatible with EMBEDDED AUDIO signals):
Digital signal output (compatible with EMBEDDED AUDIO signals):
Analog audio signal input:
Analog audio signal output:
☞ "Using the Make/Trigger system" on page 22
☞ "Using the serial communication" on page 23
525/625
525
without the stand
373 mm (14 3/4˝)
265 mm (10 1/2˝)
99 mm (4˝)
4.3 kg (9.5 lbs) (without the stand)
1 line, BNC connector x 2, 1 V (p-p), 75 Ω
* The input (IN) and output (OUT) terminals are bridge-connected
(auto termination).
HDMI connector x 1
1 Line, mini D-SUB 15pin x1
Y: 1 V(p-p), 75 Ω(with sync)
G, B/PB/B-Y, R/PR/R-Y: 0.7 V (p-p), 75 Ω
HS, VS: 0.3 V (p-p) to 5 V (p-p)
* For HS and VS, change the Low/High terminals manually.
auto detection, 2 line, BNC connector x 2
1 line switched out, BNC connector x 1
1 line, RCA connector x 2, 500 mV (rms), high impedance
1 line, RCA connector x 2, 500 mV (rms)
27

Advertisement

Table of Contents
loading

Table of Contents