Nuisance Call Block - Panasonic KX-TGE210FX Operating Instructions Manual

1
M N#239
2
MbN: Select the desired setting. a MOKN
a M N
Selecting categories to bypass do
not disturb mode
1
M N#241
2
Select your desired categories by
pressing 1 to 9.
R " " is displayed next to the selected
category numbers.
R To cancel a selected category, press
the same dial key again. " "
disappears.
3
MOKN a M N

Nuisance call block

This feature rejects calls from unwanted
callers (Caller ID subscribers only). The
following items are available when storing
phone numbers in the call block list (50 max.).
– "Single Number": The unit can reject
calls from specific phone numbers.
– "Range of Numbers": The unit can
reject calls that begin with a number stored
in the call block list, such as a toll-free
phone number prefix or certain area codes.
You can also set the unit to reject calls that do
not have a phone number.
When a call is received, the unit does not ring
while the caller is being identified. If the
caller's phone number matches an entry in the
call block list, the unit emits no sound to the
caller, and disconnects the call.
Important:
R Rejected calls are logged in the caller list.
Storing unwanted callers
Storing a single phone number
Important:
R You must include the area code when
storing phone numbers in the call block list.
n From the caller list:
TGE2xxFX(en-en)_0407_ver011.pdf
1
M N
2
MbN: Select the entry to be blocked. a
M
3
MbN: "Save CID" a MOKN
4
MbN: "Nuisance Call Block" a MOKN
5
MbN: "Yes" a MOKN a M
n By entering phone numbers:
1
M
2
MbN: "Single Number" a MOKN
3
M
4
Enter the phone number (24 digits max.).
R To erase a digit, press MCN.
5
MOKN a M
Storing a range of numbers
1
M
2
MbN: "Range of Numbers" a MOKN
3
M
4
Enter the desired number (2-8 digits).
R To erase a digit, press MCN.
5
MOKN a M
Blocking incoming calls that
have no phone number
You can reject calls when no phone number is
provided, such as private callers.
1
M
2
MbN: Select the desired setting. a MOKN
3
M
Viewing/editing/erasing call
block numbers
1
M
2
MbN: "Single Number" or "Range of
Numbers" a MOKN
3
MbN: Select the desired entry.
R To exit, press M
29
Programming
N
N
N#217
N a MbN: "Add" a MOKN
N
N#217
N a MbN: "Add" a MOKN
N
N#240
N
N#217
N.
2014/04/07
29
11:27:49