Panasonic KX-TGE210FX Operating Instructions Manual page 31

3
MbN: Select "External" to monitor
from an outside line. a M
M N
4
MbN: "Manual" a MOKN
5
Enter the desired name. a MOKN
6
Enter the desired number. a MOKN 2
times
R "Baby Monitor" will be displayed.
Note:
R The registered name/number is displayed.
Turning off the baby monitor
The monitored handset cannot be used while
baby monitor is set to "On".
1
Press M N on the handset being
monitored.
2
MbN: "On/Off" a MOKN
3
MbN: "Off" a MOKN a M
Editing an outside monitoring number
1
Press M N on the handset being
monitored.
2
MbN: "On/Off" a MOKN
3
MbN: "On" a MOKN
4
MbN: Select the outside line. a M
5
M N a MbN: "Edit" a MOKN
6
Edit the name if necessary. a MOKN
7
Edit the phone number if necessary. a
MOKN 2 times
Erasing an outside monitoring
number
1
Press M N on the handset being
monitored.
2
MbN: "On/Off" a MOKN
3
MbN: "On" a MOKN
4
MbN: Select the outside line. a M
5
M N a MbN: "Erase" a MOKN
6
MbN: "Yes" a MOKN a M
TGE2xxFX(en-en)_0407_ver011.pdf
Baby monitor sensitivity
N a
You can adjust the sensitivity of the baby
monitor. Increase or decrease the sensitivity to
adjust the sound level needed to trigger the
baby monitor feature.
R This feature cannot be set during a
monitoring call.
1
Press M
monitored.
2
MbN: "Sensitivity Level" a MOKN
3
MbN: Select the desired setting. a MOKN
a M
Answering the baby monitor
n When monitoring with a handset:
Press M
If you want to respond from the monitoring
handset, press M N.
N
R The monitoring handset will answer calls
Note:
R If you receive an outside call when
N
n When monitoring from an outside line:
To answer a call, follow the operation for
your phone.
If you want to respond from the monitoring
handset, press #1 using tone dialling.
You can turn off the baby monitor feature
by pressing #0.
Note:
R 2 minutes after the monitored handset
N
N
31
Programming
N on the handset being
N
N to answer calls.
automatically when the auto intercom
feature is set to "On" (page 18).
communicating with the monitored
handset, you hear 2 tones. To answer
the call, press M N, then press M
starts a call, communication between the
monitored handset and monitoring
phone line is turned off automatically.
N.
31
2014/04/07 11:27:50