Changing The Sensitivity According To The Movement Of The Subject Being Recorded - Panasonic DMC-FX30 Operating Instructions Manual

Advanced (Recording pictures)
Changing the
sensitivity according
to the movement of the
subject being recorded
The camera detects the movement of the
subject near the centre of the screen and
then sets the optimal ISO sensitivity and
shutter speed according to the movement
and the brightness of the subject.
1 Press [MENU/SET].
2 Press 3/4 to select [ISO LIMIT]
and then press 1.
REC
W.BALANCE
ISO
ISO LIMIT
MAX
ASPECT RATIO
PICT.SIZE
QUALITY
SELECT
SET
3 Press 3/4 to select the item and
then press [MENU/SET].
Item Settings
400 The ISO sensitivity
automatically increases up to
800
the set value according to the
movement and brightness of
1250
the subject.
• The higher the value set for the ISO
sensitivity, the more effectively the jitter
will be reduced. However, picture noise
will increase.
42
VQT1B99
• Jitter is avoided when taking pictures
• Noise is avoided when taking pictures
/
1
3
AWB
400
AUTO
400 800
• When you press the shutter button
1250 800
1250
MENU
• The focus range becomes the same as
• When the flash is activated, the ISO
• Refer to P37 for information about the
indoors of a moving subject by increasing
the ISO sensitivity and making the shutter
speed faster.
F2.8
1/125 ISO800
indoors of a subject with no movement by
decreasing the ISO sensitivity.
F2.8
1/30 ISO200
halfway, [ ] A appears. When you
press the shutter button fully, the shutter
speed and the ISO sensitivity appear for a
while.
F2.8
macro mode. [5 cm (Wide)/30 cm (Tele) to
¶]
sensitivity is automatically increased to a
maximum of [ISO640]. (When the highest
ISO sensitivity is set to a setting other
than [ISO400].)
available flash range .