JVC VR-N900U Startup Manual page 22

Preparation
During Initial Startup
(continued)
Automatic Registration of Cameras
(continued)
C
Use the [5/B] button to display the list of cameras
D
Use the [8/E] button to select a camera
E
Use the [SKIP] button to select [Settings...], followed
by pressing the [ZOOM IN/ENTER] button
● The [Camera Settings] screen appears.
Speedup Settings
Recording
Settings
14
Memo :
● Use the [SKIP] to move between the setting items.
● Using the [2/D] or [8/E] button to select a parameter.
● To enter numeric characters, press the [SELECT] button to turn
C
12
13
D
Memo :
● For details on the recording control mode, refer to
● You can specify decimal values using the software keyboard.
[Live] Screen
Live Settings
F
Set the display rate for live images
● Set the display rate for live images to ASame as
recordingB or ASame sa speedupB under [Live
Settings].
● When ASame sa speedupB is selected, the [Frame
Rate] specified under [Speedup Settings] is used as
the display rate for live images.
● When ASame as recordingB is selected, the [Frame
Rate] specified under [Recording Settings] is used
as the display rate for live images.
on the [SELECT] indicator. After entering the numeric
characters, press the [PTZ/PRESET] button to turn on the [PTZ/
PRESET] indicator.
G
Use the [SKIP] button to select [OK], followed by
pressing the [ZOOM IN/ENTER] button
Repeat Step 10 for each camera
Use the [SKIP] button to select [Close],
followed by pressing the [ZOOM IN/ENTER]
button
● Setting is complete and the [Live] screen appears.
● The [REC CONTROL] indicator lights up, and recording
starts in the recording control mode.
[INSTRUCRTIONS].