Jeep GRAND CHEROKEE SRT 2016 Owner's Manual page 397

within the Driver Information Display (DID). This fea-
ture is a visual cue to manually up-shift using the paddle
shifters.
To actuate the Shift Light feature, press the "Shift Light"
button on the touchscreen, then press the "Shift Light
On" button on the touchscreen. Activation is shown on
the DID. Pressing the "Shift Light RPM Set-Up" button
on the touchscreen will take you to the Shift Light RPM
Set-Up screen.
NOTE: You must be in Paddle Shift Mode in order to
activate the shift light. Refer to "Paddle Shift Mode" in
"Starting And Operating" for further information.
UNDERSTANDING YOUR INSTRUMENT PANEL 395
Shift Light RPM Set-Up
The Shift Light RPM Set-Up allows you to set the shift
light to illuminate for gears 1, 2, 3, 4, and 5-8. Pressing
and releasing the up/down arrow buttons above and
below each listed gear, the RPM values will change in
increments of 250 RPM. Pressing and holding the arrows
will change the RPM values in increments of 500 RPM,
4