Argox X-3200ZE User Manual page 44

SETTING
PRIORITY
Ethernet settings and parameters
(X-2300E. X-2300ZE. X-3200E. X-3200ZE):
Item
DHCP DISABLE
ENABLE
IP ADDRESS xxx.xxx.xxx.xxx
SUBNET xxx.xxx.xxx.xxx
COMMAND/
LCD PANEL
Range
graphics stored will be
deleted.
COMMAND Choosing priority of
LCD settings. It
decides which setting
method - by command
or by LCD panel, is
prior.
Factory
Default
If printer has been connected to a
router, IP address will be assigned
automatically by DHCP server after
power on.
If printer is not connected to a
router, with DHCP disabled,
settings of IP ADDRESS, SUBNET
MASK, and DEFAULT GATEWAY
settings will be available on LCD.
Every time when DISABLE is
changed to be ENABLE, LCD will
prompt "ETHERNET CARD
UPDATE FINISH..."
Then please reboot the printer.
xxx range:0~255
44
Remarks