Argox X-3200ZE User Manual page 39

LCD Function Setting Procedure
The following procedure is an example of setting procedure to
direct thermal printing mode:
LCD indicating
READY (203,PPLB)
Step 1
PRINT MODE
THERM. TRANSFER*
Step 2
PRINT MODE
DIRECT THERMAL
Step 3
PRINT MODE
DIRECT THERMAL *
Step 4
Back to standard
printing mode
READY (203,PPLB)
Printer LCD function settings and parameters:
LCD setting steps
After printer power in on, LCD will indicate
as shown at the left.
Press both PAUSE + CANCEL buttons.
Then release the buttons to enter settings.
LCD will then prompt LCD function
selections; default settings include the "*"
sign. For example, the first option of print
modes is thermal transfer.
Keep press FEED button until LCD
prompts the function setting needed.
For example, the second option of print
modes is direct thermal.
Press CANCEL button to store the setting.
The option selected will now include the "*"
sign.
Press PAUSE button to continue the other
settings.
After LCD function settings are completed,
press both PAUSE + CANCEL and then
release them to exit from settings.
Now printer is in normal printing mode.
39