Table of Contents
Advertisement
Storage Manager Client Installation
The Storage Manager client component is a Web browser-based GUI that can be used on the management
server or any other system that has network access to the management server. The Storage Manager client is
only supported on Microsoft Internet Explorer® 6 and above, and it requires some configuration before use, as
shown below.
Storage Manager Client Installation and Startup
Perform the following steps on the system that will be used to configure Internet Explorer for the Storage
Manager client:
1. Open the Start Menu, select Control Panel,
Internet Options, and then select the Security
Tab.
2. Highlight Trusted sites, and then click the Sites
button.
3. In the Trusted Sites window, type the URL or IP
Address of the management server, and then
click the Add button.
Note: If the management client is running on the
same machine as the storage manager server,
type the loopback address as shown on the
right, and then click Add.
4. Uncheck the Require server verification
(https:) for all sites in this zone checkbox, and
then click Close to continue, but do not close the
original Internet Options window.
NEC D3-10i Quick Start Guide
32
Advertisement
Table of Contents
