Adjusting The Position - JVC BLU-ESCENT DLA-VS2300G Instructions Manual

Adjusting the Position

Adjusting the elevation angle of the projector
The height and inclination of the unit (0 to 5 mm) can be
adjusted by turning the foot.
Lift the unit and adjust the foot (x4).
Extend
18
Foot
Contract
Adjusting the position of the image
By using the lens shift feature of this unit, you can shift
the image upward/downward or to the left/right. Set it to
your preferred position.
■
Horizontal Position
Vertical Position: 0% (Center)
Up to about 34% of the
projected image
■
Vertical Position
Horizontal Position: 0 % (Center)
Up to about 80% of the
projected image
■
Lens shift Range
90
80
70
60
50
40
30
20
10
0 10 20 30
Horizontal lens shift (%)
The maximum vertical shift varies with the amount of
0
horizontal shift. Similarly, the maximum horizontal
shift also changes with the amount of vertical shift.
The values on the graph are intended as a guide. Use
0
them for reference during installation.
To adjust the screen position, it is recommended to
0
wait till the position becomes stable after projection
before adjusting. The position may changed after
projection depending on the attitude of the projector.
Lens shift range
40