JVC BLU-ESCENT DLA-VS2300G Instructions Manual page 43

Cool-down time is long
Check
Is the Auto Intensity function On?
Video image looks unnatural
Colors are unnatural
Check
Is the color space of the input signal
correctly set?
Is the image correctly adjusted?
Is the video source equipment properly
connected?
* The video image may appear slightly reddish immediately after starting up. This is not a malfunction.
Video image is fuzzy
Check
Is the focus correctly adjusted?
Is the unit placed too near or too far away
from the screen?
Projected image is dark
Check
Is the laser light source near exhaustion? Check the laser light source time in the "Information" menu.
Is the aperture closed?
Is "LD Current" set to "Lower"?
Video images are missing
Check
Has screen mask been configured?
Is the display position misaligned?
Please wait until the Cool-down mode is completed. If the
Auto Intensity function is On, it will take up to 6 minutes to
process the brightness adjustment.
The color may turn out unnatural when the input signal is
different from that in the projector setting.
Set the "Color Space" for "Input Signal" correctly.
Adjust "Color" and "Tint" accordingly.
Check to ensure that the video source equipment is
properly connected.
Adjust the focus.
Set the unit at a correct distance from the screen.
If 40,000 hours have elapsed, the brightness will be half the
brightness at shipment.
Adjust the Aperture.
Set "LD Current" to "Higher"
Set "Mask" to "Off".
Alter the "Picture Position" value so that the entire image
appears on the screen.
Action
Action
Action
Action
Action
Refer to
p. 23
Refer to
p. 30
p. 29, p. 29
p. 19
Refer to
p. 32
p. 50
Refer to
p. 39
p. 26
p. 26
Refer to
p. 31
p. 31
43