Buderus 500 - 28/C Servicing Manual page 13

box 14 Settings menu
Use single or multiple operation of the
step 7
[pr# H
( ): Hot water mode to ECO,
E
Press the -button once.
step 8
[60)
step 9 As soon as the DHW temperature (in °C) appears on the display
DHW temperature, or adjust it as required. See also box 18.
step 10 Adjust DHW temperature ?
step 11 Lower: lower the DHW temperature with the
Higher: increase the DHW temperature with the
E
step 12 Press the -button once.
[pr' K
L
( /
step 13
heating mode, or adjust it as required. See also box 18.
step 14 Adjust configured heating mode ?
step 15 Use single or multiple operation of the
[pr. K
( ): Heating mode on,
E
step 16 Press the -button once.
[80.
Configure CH flow temperature, in °C. See also box 18. As soon as
step 17
the current CH flow temperature, or adjust it as required.
step 18 Adjust CH flow temperature ?
step 19 Lower: lower the CH flow temperature with the
Higher: increase the CH flow temperature with the
step 20 Has at least 10 seconds passed without a button being pressed and/or was mains supply interrupted ?
E
step 21 Press the -button once.
step 22 Any adjustments that you have made will now be confirmed.
We reserve the right to make technical modifications
Servicing manual Gas condensing boiler Buderus 500-24/S, 500-24/C and 500-28/C • Issued 02/2006
D C
- and
[pr` I
(
D
-button.
C
) Configured heating mode. As soon as
D C
- and
[pr;
L
( ): Heating mode off.
D
-buttons to activate and disable hot water mode.
): Hot water mode to warm start.
[60)
, you can read the current
-button.
[pr'
is displayed, you can verify the current
-buttons to activate and disable heating mode.
[80.
-button.
C
-button.
Operation
is displayed, you can verify
Buderus Ltd. • http://www.buderus-domestic.co.uk
3
→
step 11
Yes:
→
step 12
No:
→
Yes: step 15
→
No: step 16
→
Yes: step 19
→
No: step 20
→
Yes: step 22
→
No: step 21
→
step 1
13