Sony SRG-120DS Operating Instructions Manual page 17

Cancelling the preset memory
While holding down the RESET button, press the
POSITION button from which you want to cancel the
settings.
When you set DISPLAY INFO (
SYSTEM menu, the message "RESET n : OK"
automatically appears for about 3 seconds on the monitor
screen.
Notes
• When the power is turned on, the camera starts with the
settings stored in POSITION 1.
• If you want to retain the previous pan and tilt positions,
etc. before the power is turned off and turned on again,
store those positions in POSITION 1.
• When you are storing or cancelling the settings in one
POSITION, you cannot call up, store or cancel the
settings in another POSITION.
• When the menu is displayed on the screen, you cannot
perform the operation for storing, recalling, or
cancelling the setting. Be sure to return to the normal
display before starting these operations.
Press a
POSITION
button.
While holding
down this button
to ON on the
page 12)
17