Power On/Off; Signal Search (Cell Search); Locking The Keypads - Panasonic KX-TD7680 Operating Instructions Manual

Before Operating the PS

Power On/Off

Power On
Press POWER for about 2 seconds,
and "KX-TD7680" will be displayed.
• When the PS is turned on, it will be in standby mode. Standby mode is the state
of the PS when it is not performing any operations and is awaiting calls.

Signal Search (Cell Search)

You can search for the strongest cell station for your PS while it is in standby mode.
Press FUNC.

Locking the Keypads

You can lock the dialing buttons while the PS is in idle status.
Press HOLD for
about 2 seconds.
6
Press .
Power Off
Press POWER for about 2 seconds.
The display will go blank.
<Display>
SEARCHING
<Display>
To lock
HOLD DOWN TO
LOCK KEYPAD
To unlock
SEARCH OK
HOLD DOWN TO
UNLOCK KEYPAD