STEP 2: Preparing the speakers
Assembling the speakers
[BTT880] Front speakers, Surround speakers
1
Attach the stand to the base.
2
Tighten the 3 screws (supplied) securely.
3
Slide the speaker cable into the groove.
≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
Getting started
Thread the speaker
cable through the
base.
- 12 -
4
Attach the speaker.
5
Tighten the screw (supplied) securely.
≥ After connecting the speaker cable (
press the cable into the groove.
Groove
13),