Step 1 Preparing The Speakers - Panasonic SC-PT880 Operating Instructions Manual

step 1 Preparing the speakers
Front speakers
[PT580]
Front and surround speakers
[PT880]
Make sure you have all the indicated components before starting assembly, setup, and connection.
≥ Keep the screws out of reach of children to prevent swallowing.
≥ For optional wall mount, refer to page 21.
[PT580]
2 Front speakers
[PT880]
2 Front speakers
2 Surround speakers
1
2
Speaker assembly option
Thread the speaker cable through
the base.
You can remove and use the
cable from the stand. To reattach
the cable, refer to page 21.
Preventing the speakers from falling
≥ You will need to obtain the appropriate screw eyes to match the walls
or pillars to which they are going to be fastened.
≥ Consult a qualified housing contractor concerning the appropriate
procedure when attaching to a concrete wall or a surface that may not
have strong enough support. Improper attachment may result in
damage to the wall or speakers.
String (not included)
Thread from the wall to the speaker and tie tightly.
Speaker
(rear)
6
6
[PT580]
2 Stands (with cable)
[PT880]
4 Stands (with cable)
Position the cable
between the ridges.
Leave about 120 mm.
Attach the speaker.
Leave about
120 mm.
Screw eye
Wall
(not included)
Preparation
≥ To prevent damage or scratches, lay down a soft cloth to assemble
speakers.
≥ For assembly, use a Phillips-head screwdriver (not included).
[PT580] 2 Bases
[PT880] 4 Bases
Slide into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue line
Press into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue line
Press into the groove.
Tighten securely.
Caution
≥ Do not stand on the base. Be cautious when children are near.
≥ When carrying the speaker, hold the stand and base parts.
Approx.
150 mm
[PT580]
8 Screws
[PT880] 16 Screws
Push!
Push!
Slide into the
groove.
2
1