Table of Contents
Advertisement
STEP 1: Positioning
For optimum position
Place the front, centre and surround speakers at approximately the same distance from the seating
position.
≥ Adjust the volume using the Delay time function if the distance between each speaker and the
seating position is not equal. (
e.g., [BTT880]
≥ [BTT500W] The surround speakers can be connected to the main unit without using the wireless system. In that case, the
following steps are not required.
– Digital transmitter connection (
– Connecting the AC mains lead to the wireless system (
– Preparing the wireless system (
≥ Place the wireless system within approximately 10 m from the main unit.
≥ To allow for proper ventilation and to maintain good airflow around the wireless system, position it with at least 5 cm of space
on all sides.
≥ Do not use the wireless system or the digital transmitter in a metal cabinet or bookshelf.
≥ Keep your speakers at least 10 mm away from the system to avoid noise generated by resonance.
≥ Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick
curtains.
≥ For optional wall mount, refer to page 41.
∫ Upgrade to 7.1-channel system
The main unit is designed to enjoy the 7.1ch surround sound. A more theatre-like effect is possible with
a wireless connection.
Necessary equipment:
≥ Wireless system (SH-FX71)
1 optional system
≥ 2 additional speakers [Impedance: 3 ≠ to 6 ≠, Speaker input power: 100 W (Min)]
≥ [BTT500W] Even when the surround speakers are connected to the main unit, the 7.1-channel system cannot be used.
≥ For more details, refer to the operating instructions for SH-FX71.
≥ The WIRELESS LINK indicator lights green when this unit and SH-FX71 are connected wirelessly. You can also check the
link status if you press and hold the [SOUND] of this unit. When WIRELESS LINK is turned on, the main unit's display shows
the message, "WIRELESS SPEAKERS LINKED".
40)
60°
120°
16)
17)
Getting started
A Centre speaker
≥ Put on a rack or shelf not to interfere with the
TV's various sensors (ambient light, etc.).
Vibration caused by the speaker can disrupt
the picture if it is placed directly on the TV.
B Front speakers
C Subwoofer
D Surround speakers
≥ Place the speakers at the same height or
higher than ear level.
E Wireless system
≥ To avoid interference, separate the wireless
system from the other electronic devices
that use the same radio frequency (2.4 GHz
band).
Wireless
system
17)
- 11 -
Wireless LAN
Cordless phone
Advertisement
Table of Contents
