Table of Contents
Advertisement
Resolution Audio are output as Dolby Digital
or DTS Digital Surround.
Re-master will not work when the bitstream signal
is output from the HDMI AV OUT terminal. (
Depending on the connected equipment, the
sound may be distorted if this unit is
connected with an HDMI cable.
The multi-channel audio from a device
connected to the TV is not output in it's
original multi-channel form.
jIf the device has an optical audio output
terminal, connect the device to this unit's
DIGITAL AUDIO IN terminal. (
No surround sound.
Press [SURROUND] to select a surround
effect. (
41)
Ensure that the surround selector switch of the
wireless system is set in the centre position. Then,
turn the wireless system off and then back on.
(When using the 7.1ch speaker system)
Audio is not available from the surround back
speakers (optional) even though Dolby Pro
Logic II turns on.
Cannot switch audio.
When audio is output from the HDMI AV OUT
terminal, set "Dolby D/Dolby D +/Dolby TrueHD",
"DTS/DTS-HD" or "MPEG Audio" to "PCM". (
No sound from the TV.
Press [EXT-IN] to select the corresponding
source. (
20)
When connecting the unit to a TV using an
HDMI cable, check whether the HDMI
terminal on the TV is labelled "HDMI (ARC)".
If not labelled in this way, connect using the
HDMI cable in combination with an optical
digital audio cable. (
If there is no sound from the equipment
connected to this unit's DIGITAL AUDIO IN
terminal, please make sure that the optical
audio output of the equipment is set to PCM.
Playback
Disc cannot be played.
The disc is dirty. (
The disc is not finalized. (
Still pictures (JPEG) do not play back
normally.
The images that were edited on the PC, such as
Progressive JPEG, etc., may not be played back.
34)
15)
14)
6)
8)
Reference
I can't play back BD-Live.
The SD card is write-protected. (
Confirm that this unit is connected to the
broadband Internet. (
Confirm the "BD-Live Internet Access"
settings. (
Confirm an SD card is inserted into the SD
card slot. (
Alternative soundtrack and subtitles cannot
be selected.
The languages are not recorded on the disc.
You may not be able to use the Option menu
to change the soundtrack and subtitles on
some discs. Use the disc's menus to make
changes. (
iPod/iPhone operation
Cannot charge or operate.
Check that the iPod/iPhone is connected
firmly. (
26)
When iPod/iPhone devices are connected to
both the USB port and the Dock, disconnect
both of them, and then connect only the one
you want to play back.
The battery of the iPod/iPhone is depleted.
36)
Charge the iPod/iPhone, and then operate
again.
When unexpected operation occurs while
using the iPod/iPhone, connect the iPod/
iPhone again or try to restart the iPod/iPhone.
Radio
Distorted sound or noise is heard.
Adjust the position of the antenna.
A beat sound is heard.
Try to keep a certain amount of distance
between the antenna and the TV.
Noise is excessive.
Change the audio to be output as monaural.
Press [AUDIO] to select "MONO".
The sound becomes monaural.
≥ To cancel, press the button again or change
the frequency.
In normal circumstances, select "AUTO STEREO".
- 45 -
16)
38)
20)
24)
8)
Advertisement
Table of Contents
