Step 2 Channel Reception Settings; Preset Download - Panasonic DMR-E500H Operating Instructions Manual

2
STEP Channel reception settings
Í/ l
EJECT
PC CARD
SD CARD
HDD
DVD
TV
Í DVD
DIRECT TV REC
AV
HDD DVD
Numbered 1 2
buttons
4 5
7 8
CANCEL
¢ CANCEL
0
SKIP
STOP PAUSE
DIRECT NAVIGATOR
TOP MENU
3,4,2,1
ENTER
SUB MENU
PROG/CHECK DISPLAY
TIMER ERASE
F
EXT LINK DUBBING
A B

Preset Download

(Setup with Q Link functions)
When connecting to a television that has the Q Link
function (➡page 72) with a fully wired 21-pin Scart lead
(➡page 7).
"TV stations" tuning information and positions will be downloaded
from the TV to this unit. The clock will be set automatically from
data sent by the broadcaster.
1
Turn on the television and select the
appropriate AV input to suit the
connections to this unit.
2
Press [Í DVD] to turn the unit on.
Downloading from the television starts.
Download from TV Download from TV
Pos Pos 4 4
Download in progress, please wait. Download in progress, please wait.
RETURN: to abort RETURN: to abort
RETURN RETURN
OPEN/CLOSE
TIME SLIP HDD DVD SD PC DRIVE SELECT / x 1.3
TIME SLIP CH REC
DVD
X CH W
VOLUME
CH
SD/PC
3
W X CH
CH
6
VIDEO Plus+
VIDEO Plus+
9
INPUT SELECT
MANUAL SKIP
SLOW/SEARCH
PLAY/x1.3
FUNCTIONS
FUNCTIONS
ENTER
RETURN
RETURN
STATUS TIME SLIP
REC MODE REC
CREATE
AUDIO
CHAPTER
C
3
When downloading has completed, the Owner ID
settings screen appears.
Press [1] and press the numbered
buttons to enter a 4-digit PIN number.
Owner ID
¢¢¢¢
PIN number
Name
House No.
Postcode
RETURN
RETURN : leave
≥Make a note of the PIN number (don't forget), as it is not
possible to return to the factory preset.
4
Press [ENTER] twice to store the PIN
number.
The cursor moves to "Name".
5
Press [1].
6
Press [3, 4] to select a letter and
then press [1].
Repeat this to enter the name.
7
Press [ENTER] to store the name.
8
Press [4] and [1], and then repeat
steps 6, 7 to enter and store "House
No." and "Postcode".
9
Press [RETURN].
The Owner ID settings screen disappears.
To stop partway
Press [RETURN].
∫ If the clock setting menu appears
Set the clock manually (➡ page 69).
∫ To confirm that stations have been tuned
correctly (➡page 68)
∫ To restart Preset Download (➡page 68)
∫ If you connect other equipment to AV2 terminal
of this unit
Change the "AV2 Input" and "AV2 Connection" in the SETUP menu
to match the connected equipment (➡ page 67).
∫ If there is interference or a very poor picture
appears on the TV screen
Refer to "Removing Interference" on page 13, and perform steps 1,
2 and 4 to stop the RF output. In step 2, press [0] to select "ss".
[Note]
If this unit is connected to a digital TV (IDTV), only the analogue
station's tuning information will be downloaded.
RQT7755
11