Table of Contents
Advertisement
Base Unit Settings
Selecting the Recall Time
You can change the duration of the recall time depending on the requirements of your
telephone company or PBX.
Follow steps 1 to 4 of Call Options on the previous page, then:
5
Select "Recall".
• The factory preset is "Type 2" (600 ms).
Selecting the Pause Time
You can select the pause time to 3 or 5 seconds, depending on your PBX requirements.
Follow steps 1 to 4 of Call Options on the previous page, then:
5
Select "Pause Time".
• The factory preset is "Short".
Setting the Emergency Calls
With the handset in Call Bar Mode, you can still make an emergency call.
Follow steps 1 to 4 of Call Options on the previous page, then:
5
Select "Emergency Call".
7
Enter Emergency Call Number.
• The factory preset is 111, 911 and 999.
NOTE: The factory preset Emergency Call numbers are stored in the first 3
"Emergency Call" locations, it is recommended that you do not overwrite
these numbers.
46
6
Select "Type 1" (100 ms), "Type 2" (600 ms) or
"Type 3" (200 ms).
6
Select "Short" (3 sec.) or "Long" (5 sec.).
6
Select "Emergency Call1" to
"Emergency Call5".
8
Press JOYSTICK.
Advertisement
Table of Contents
