Panasonic TY-TCG20 Operating Instructions

Operating Instructions
Charger for Interactive Plasma Display
TY-TCG20
Model No.
Before connecting, operating or adjusting this product,
English
please read these instructions completely.
Please keep this manual for future reference.
TQBC2740
M0413-0
Printed in Japan
FCC and IC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 18 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the Panasonic Service Center or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, follow the attached installation
instructions and use only shielded interface cable when connecting to computer or
peripheral devices. Any changes or modifi cations not expressly approved by Panasonic
Corp. of North America could void the user's authority to operate this device.
Under Industry Canada regulations, this radio transmitter may only operate using
an antenna of a type and maximum (or lesser) gain approved for the transmitter by
Industry Canada. To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for successful communication.
FCC Declaration of Conformity
Models: N0HZZY000003
Responsible Party: Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Contact Source: Panasonic System Communications
Company of North America
Panasonic North America 3 Panasonic Way
7D-6, Secaucus NJ 07094
Telephone:+1-855-772-8324
http://panasonic.com/business/fl at-panel-displays/
This device complies with Part 18 of the FCC Rules and all applicable IC RSS
standards. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Safety Precautions
Warning
About Charging
■ Do not use the included charging cable for uses other than
charging Electronic Pen.
Doing so may result in heating, combustion or damage.
About Charger
■ Keep the clamper and screws out of reach of children to prevent
swallowing.
• Please seek medical attention immediately if you suspect a child has
swallowed the clamper and/or screws.
Caution
■ Always keep the Charger in a cool, dry place.
Failure to do so may cause fi re or electric shock.
■ Do not bring magnetically susceptible objects (e.g. cash card,
passbook) close to the charger
The magnetic line from the charger may make magnetically susceptible
objects unusable.
Precautions
Any changes or modifi cations not expressly approved by the party
responsible for compliance could void the user's authority to operate this
device.
Other Information
• Do not put scissors, a screwdriver or any other metal object in the
charger.
Doing so may result in damage of the charger.
No responsibility will be taken by our company with respect
to consequences resulting from the use, damage or both of
the equipment.
Accessories Supplied
Check that all of the following items are included with your Interactive
Plasma Display.
In the event that an item is missing, please contact your dealer.
Charger cable (1) Cable (2)
K1HY05YY0098 K1HY05YY0099
Charger (1) Stand (1)
N0HZZY000003 TMWX0841
Mounting plate (1) Clamper (1) Screw (2)
TXFUW041JHJ TMME190 XTV3+12GFJK
Usage
For information on how to use or dispose of the charger, or how to use
the optical attachment, see the TH-50PB2 or TH-65PB2 series operating
instructions (Electronic Pen Operations) displayed by the following URLs.
The operating instructions (Electronic Pen Operations) are also provided
in the CD-ROM included in the PB2 series Display.
http://panasonic.net/prodisplays/download/specsheets.html

Specifications

Type Charger
Usage 0 °C - 40 °C
temperature range
External 2.40" (61.0 mm) × 3.55" (90.0 mm) ×
dimensions 1.77" (45.0 mm)
(W × H × D)
Weight Approx. 0.24 lb. (Approx. 110 g)
Note
• The charger complies with EN 55011 Group 2, Class B.
Information for Users on Collection and Disposal of Old
Equipment
These symbols on the products, packaging, and/or accompanying
documents mean that used electrical and electronic products and
batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old
products, please take them to applicable collection points,
in accordance with your national legislation and the
Directives 2002/96/EC and 2006/66/EC.
By disposing of these products correctly, you will help to save
valuable resources and prevent any potential negative effects
on human health and the environment which could otherwise
arise from inappropriate waste handling.
For more information about collection and recycling of
old products, please contact your local municipality, your
waste disposal service or the point of sale where you
purchased the items.
Penalties may be applicable for incorrect disposal of this
waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment,
please contact your dealer or supplier for further information.
[Information on Disposal in other Countries outside
the European Union]
These symbols are only valid in the European Union. If
you wish to discard these items, please contact your local
authorities or dealer and ask for the correct method of disposal.
USA Only:
Disposal may be regulated in your community due to environmental considerations.
For disposal or recycling information, please visit Panasonic website:
http://www.panasonic.com/environmental or call 1-888-769-0149.
Customer's Record
The model number and serial number of this product can be found on the body.
You should note this serial number in the space provided below and retain this
book, plus your purchase receipt, as a permanent record of your purchase to aid in
identifi cation in the event of theft or loss, and for Warranty Service purposes.
Model Number Serial Number
Charger for Interactive Plasma Display
Declaration of Conformity (DoC)
"Hereby, Panasonic Corporation declares that this Charger is in compliance
with the essential requirements and other relevant provisions of the
Directive 2004/108/EC, Directive 2006/95/EC, Directive 2011/65/EU."
If you want to get a copy of the original DoC of this display, please visit the
following website:
http://www.doc.panasonic.de
Authorized Representative:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
Web Site : http://panasonic.net
© Panasonic Corporation 2013
Panasonic System Communications Company of North America
Unit of Panasonic Corporation of North America
Executive Offi ce :
Three Panasonic Way 2F-5, Secaucus, NJ 07094
Panasonic Canada Inc.
5770 Ambler DriveMississauga, Ontario
L4W 2T3