Dividing Programmes; Using Play List To Edit Programmes; Displaying Play List - Panasonic DMR-E60 Operating Instructions Manual

Using the DIRECT NAVIGATOR (continued)

Dividing programmes

[RAM]
You can divide a selected programme into two.
You must be sure you wish to divide a programme because
once a programme has been divided it cannot be returned to
its original form.
Preparation
≥Switch [DVD, TV] (19) to "DVD".
≥Insert a disc you have recorded on.
After performing steps 1 to 3 of "Erasing
programmes"(page 40), perform the following steps:
Use [3, 4] (10) to select "Divide" and press
4
[ENTER] (10).
5
Use search functions such as fast-forward and
slow-motion to find the point you want to divide and
press [ENTER] (10).
Divide
Programme
03
Preview
Divide
Exit
0 : 00 . 05
3
SELECT
Divide
ENTER
RETURN 0 : 00 . 05
Use [3, 4] (10) to select "Exit" and press [ENTER]
6
(10).
Use [2] (10) to select "Divide" and press [ENTER]
7
(10).
≥The programme is divided at the point.
Divide Programme
Once divided, this programme cannot be
re-combined.
Divide Cancel
SELECT
RETURN
ENTER
ªTo stop partway through
Select "Cancel" in step 7 and press [ENTER] (10).
Or
Press [RETURN] (28).
ªTo change the point to divide
Select "Divide" in step 6, then repeat steps 5-7.
ªTo check the division point
By selecting "Preview" in step 6 and pressing [ENTER] (10), play
will begin from a point 10 seconds prior to the division point. You
may wish to make sure that the division point is at an appropriate
location.
Note
≥The divided programmes retain the title of the original
programme.
≥A minute portion of the recording directly preceding the division
point may be lost.
For your reference
≥Use search and slow-motion to find the points.
≥It is not possible to carry out "Divide" in the following cases:
-When the resulting part(s) are extremely short.
-When the total number of programme is more than 99.

Using PLAY LIST to edit programmes

Displaying PLAY LIST

[RAM]
Preparation
≥Switch [DVD, TV] (19) to "DVD".
≥Insert a disc you have recorded on.
Press [PLAY LIST] (27).
PLAY LIST
001 002 003
004 - - - - - -
No. Date Total Scene Title
3
01 15/7 0:03 006 Auto action
No.
02 15/7 0:07 006 USJ
0 – 9
03 23/7 0:06 004 Dinosaur
/ :
SELECT
– – – – – —
ENTER
RETURN
The play list screen appears. Scenes are not displayed if you have
not yet created a play list with the disc.
ªTo clear the PLAY LIST screen
Press [PLAY LIST] (27) or [RETURN] (28).
The screen returns to the state it was in before you called up the
play list.
ªWhat you can do with the PLAY LIST screen
≥Creating PLAY LIST (page 43)
≥Playing PLAY LIST (page 43)
≥Select a scene to play (page 44)
≥Add, move, re-edit and erase scenes
(pages 44,45 and 46)
≥Copying PLAY LIST (page 46)
≥Erasing a PLAY LIST (page 46)
≥Give PLAY LIST titles (page 46)
≥Checking PLAY LIST's contents
(page 46)
For your reference
≥When the disc is protected (pages 37, 74), you can only access
"Play Scenes" and "Properties". Release the protection to access
other items.
About the PLAY LIST Scene screen
a)
3 15/7 0:02 004 Dinosaur
PLAY LIST
Play Scenes
003
001 00:00.19 002
- - -
004 - - -
SELECT PAGE
0 – 9
- - - - - - - - -
SELECT
ENTER
Back 001/001 Next
RETURN
a) Play list information
This shows the play list number, date of creation (date/month),
total play time, and the number of scenes it contains and title (if
entered).
b) Scenes
9 scenes can be shown on a page.
c) Turning pages
If there are more than 9 scenes, use [3, 4, 2, 1] (10) to
select "2 Back" or "Next 1" and press [ENTER] (10) to move
to the previous page or next page. You can also enter the
3-digits with the numeric buttons (4).
42
Edit
1
1
1
1
1
1
Play Scenes
Edit
PL Copy
PL Erase
Enter Title
Properties
b)
c)