Table of Contents
Advertisement
•
Unsent event reports to a CMS are erased only in the case of a
telephone number, account ID or communication format change
•
Information about the end of fault events is transferred to the
monitoring station during programming mode
•
Changes of setting will take affect after exiting programming mode
9.4
The master code holder can change the following
parameters
•
Telephone numbers 1 – 7 (see section 3.1)
•
SMS and audible warning transfers (see section 4)
•
Change of remote user code
•
One-time dialing in
•
Measuring of GSM signal
•
Attached phone functionality
•
Telephone number for emergency calls
JA-60GSM communicator module
10 Technical specifications
power
12VDC / max. 1A – provided by the alarm control panel
GSM bands
transmitted power
AUX output
comply with
security grade
environmental class
safety
EMC
radio characteristics
Caller line identification presentation (CLIP) ETSI EN 300 089 V3.1.(2000-12)
Can be operated according to commission decision 2000/299/EC
Hereby, Jablotron Ltd., declares that this JA-60GSM is
in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
Original of the conformity assessment can be found at the web page
www.jablotron.cz, section Technical support.
Note: Although this product does not contain any harmful materials we
suggest you to return the product to the dealer or directly to the
producer after usage.
- 11 -
E-GSM/GPRS 900/1800MHz
2 W for GSM900, 1 W for GSM1800
dry contact, max. 100mA / 60V
EN 50131-1, EN 50136-2-1, 2-3, 2-4
2 (low to medium risk)
II indoor-general ( –10 to 40°C)
EN 301489-1, EN 301489-7, EN 55022, EN 50130-4
ETSI EN 301419-1, EN 301511
EN 60950
MFJ51212
Advertisement
Table of Contents
