Subscribe to Our Youtube Channel
Related Manuals for jablotron TD-101
Summary of Contents for jablotron TD-101
- Page 1 Pod Skalkou 33 466 01 Jablonec nad Nisou Czech Republic E-mail : export@jablotron.cz http://www.jablotron.cz...
-
Page 2: Table Of Contents
11.1. Trigger inputs IN1 and IN2 connection ............. 20 11.2. Use of the dialer only for emergency dialing (old or ill people) ......20 11.3. Example of TD-101(W) use with different alarm systems ......... 21 - 2 - Telephone dialer TD-101 / TD-101W... -
Page 3: Description
Although this product does not contain any harmful materials we suggest you to return the product to In standby mode the TD-101 waits for an input from either of the trigger inputs or from the built in keypad. the dealer or directly to the producer after usage. -
Page 4: Td-101 Includes
10 seconds). Then the TD-101 will enter the stand by mode. In this mode, the TD-101 is waiting for an mode input form either the keypad or the trigger inputs. For correct function of the dialer, the telephone... - Page 5 The dialer inputs are separated with optocouplers, so the variety of possible connections is really wide. The following examples are only for your reference. Other connections and settings are also possible to meet your requirements. Ask you distributor if you need any advice regarding the TD-101 installation or programming.
-
Page 6: Voice & Pager Messages Setting
Note: If only one message (20 sec.) is selected in the installer level, record it as message no.1. - 6 - - 19 - Telephone dialer TD-101 / TD-101W MDJ512 10 Telephone dialer TD-101 / TD-101W MDJ512 10... -
Page 7: Entering Telephone Numbers And Data For Pager
All remote controls can be erased from the TD-101W memory in the user mode (the green LED is ON - see 6.1.), entering: Note: This instruction can be used if you lost your remote control. - 18 - - 7 - Telephone dialer TD-101 / TD-101W MDJ512 10 Telephone dialer TD-101 / TD-101W MDJ512 10... -
Page 8: Testing The Message Sending
(protection of accidental change). Original factory default setting of the User Code is 1234. Example : The user code will be changed for code 2010 : - 8 - - 17 - Telephone dialer TD-101 / TD-101W MDJ512 10 Telephone dialer TD-101 / TD-101W MDJ512 10... - Page 9 In such a case enter the user mode with your user code (the green LED will be switched on), the TD-101 will be disabled. Remember that the user mode can only be entered in the moment when the dialer is not calling (red LED must be off). Do not forget to switch...
-
Page 10: Monitoring Station Data Sending
7. Monitoring station data sending If Stop with key is enabled, the TD-101 action can be stopped only if no input is triggered. The dialer action is terminated a few seconds after the key is pressed. Function of the TD-101 including the Monitoring Station (MS) communication is demonstrated in the diagram on page 9. -
Page 11: Monitoring Station Communication Protocol & Format Setting
, disabled enabled (factory default setting) where: The audible line monitoring with built in speaker is always enabled when you test the TD-101. means event on the inputs, see following table: Example: The audible dialing monitor will be enabled : input... -
Page 12: Testing The Monitoring Station Communication
1 = 1x 20sec. or 2 = 2x 10sec. (factory default = 2 messages, max. 10sec. each) - 12 - - 13 - Telephone dialer TD-101 / TD-101W MDJ512 10 Telephone dialer TD-101 / TD-101W MDJ512 10...
Need help?
Do you have a question about the TD-101 and is the answer not in the manual?
Questions and answers