Table of Contents
Advertisement
MedeaWiz® Sprite
.
Baud Rate
Select the baud rate for the serial port
The baud rate is the speed of the serial communication and should match the settings on your
external controller.
The default is 9600 bps.
To use the legacy MedeaWiz DV-68K pushbutton control interface with the Sprite, set the baud
rate to 4800. You will also need to fabricate or purchase an interface cable to adapt to the 4p4c
modular connector on the DV-68K.
The TK-68K and TK-69K series controllers can be re-programmed to 9600 baud rate, and must
be re-programmed for the end of file marker of the Sprite.
12 |
P a g e
Advertisement
Table of Contents
