5. Attach the 510 Sensor to the mounting bracket.
WARNING!
4.7.2
Drop Ceiling Tiles
This procedure applies to T-bars that are 23.9 mm (15/16 inches), 14.2-mm (9/16-inches), or 15.9-mm
(5/8-inches) wide. You also can use this procedure for flush ceilings with 14.2-mm (9/16-inch) or 15.9-
mm (5/8-inch) T-bars.
510 Sensor
Figure 5: Required Hardware for Drop Ceiling Tiles
Lock
T-bar
If you plan to use an external antenna for the 802.11b/g or 802.11a
radio, install the antenna at least 20 cm from the sensor.
Mounting template
T-bar clamps
(use set that fits T-bar)
Hardware Installation
Mounting bracket
15