Panasonic WV-CM1480 Operating Instructions Manual page 5

!5 Standby Control Terminal (STANDBY ON/STANDBY
OFF/G)
This terminal accepts input from an outboard device to
control the standby mode.
It operates as follows:
STANDBY ON: Establishes the specified standby
mode.
STANDBY OFF: Releases standby mode (normal dis-
play).
!6 Audio Input Connectors (AUDIO IN A/B)
For audio input from an outboard device
!7 Audio Output Connectors (AUDIO OUT A/B)
The audio input signal connected to the Audio Input
Connector is looped through to this connector.
!8 S-Video Input Connector (S-VIDEO IN)
For input of S-video signal from an outboard device.
!9 Video Input Connectors (VIDEO IN A/B)
For input of composite video signal from an outboard
device.
@0 Video Output Connectors (VIDEO OUT A/B)
The video input signal connected to the Video Input
Connector is looped through to this connector and ter-
minated automatically.
@1 AC Inlet Socket (AC IN)
Plug the power cord (supplied as a standard accesso-
ry) into this socket and connect it to an AC outlet.
5