BMW R1200RT Rider's Manual page 130

7
128
Install plug 1.
z
Insert cover 1 and turn it clock-
wise to install.
Replacing bulb for high-
beam headlight
The description below
steps you through the
procedure for replacing the left
bulb. The procedure for working
on the right side is the same.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Remove screws 2.
Ease speaker cover 1 to the
left to remove.
Remove screws 1.
Carefully remove speaker
unit 2, noting the plug.
Disconnect plug 1.