BMW R1200RT Rider's Manual page 125

Lift front wheel and fit quick-
release axle 1.
Remove front-wheel stand and
firmly compress front forks
several times. Do not oper-
ate front break lever.
Installing the front-wheel stand
( 125).
Install screw 1 and tighten to
specified torque. Counter-hold
quick-release axle on the right-
hand side.
Quick-release axle in
telescopic forks
30 Nm
Tighten left-hand axle clamp-
ing screw 2 to the specified
torque.
Clamping screw for
quick-release axle in
telescopic fork
19 Nm
Tighten right axle clamping
screw 1 to the specified
torque.
Clamping screw for
quick-release axle in
telescopic fork
19 Nm
Removing the front-wheel
stand.
Place brake calipers left and
right onto the brake discs.
7
123
z