Component Video Out; Connecting A Tv With Component Video; Progressive Television Picture - Panasonic DMR-EX95V Operating Instructions Manual

COMPONENT VIDEO OUT

TV
Audioinput L/R
Audio cable
L - White
R - Red
AV OUT
AUDIO OUT
Setup TV Aspect
Progressive
Tuning
TV System
Disc
HDMI Settings
Picture
AV1 Output
Sound
AV2 Settings
Display
Connection
Active Antenna
VHS
Others
Setup
TV Aspect
Progressive
Tuning
TV System
Disc
HDMI Settings
Picture
AV1 Output
Sound
Display AV2 Settings
Connection
Active Antenna
VHS
Others
Downloaded From DvDPlayer-Manual.com Panasonic Manuals
COMPONENT VIDEO OUT terminal
The terminals can be used for INTERLACE or PROGRESSIVE output and deliver a
COMPONENT
clearer picture than the S VIDEO OUT terminal.
VIDEO IN
Connections via these terminals output the colour difference signals (P
Y P P
B R
brightness signal (Y) separately.
Colours can be reproduced true to the original colour.
The properties of the COMPONENT VIDEO input terminal are dependent on the
Video cable
Y - Green
TV or screen.
PB - Blue
PR - Red
Connect the COMPONENT VIDEO OUT sockets of the unit with the
COMPONENT VIDEO IN of the TV unit. Use a Video cable.
Always connect terminals with the same colour.
COMPONENT VIDEO OUT
Y
Connect the audio cables to the corresponding audio input terminal on the TV.
P
B
S VIDEO OUT
P
R
Connecting a TV with COMPONENT VIDEO input terminals
4:3
If your TV with LCD or plasma screen supports the progressive process, connect it
On
to the COMPONENT VIDEO OUT terminal.
PAL
If you want to enjoy full progressive video, set Progressive to [On].
Video
If the AV1 Output setting in the Setup menu is set to [RGB 1/2 ( without component )],
there is no output to the COMPONENT VIDEO OUT terminal.
Off
AV1 Output
Set this option to [Video ( with component )].
Video ( with component ) SELECT TAB
If the unit is connected to the TV via the S VIDEO OUT or the AV1 terminal,
RGB 1 ( without component ) ENTER RETURN
output is Interlace regardless of the settings
RGB 2 ( without component )
RGB output is available all the
time while this unit is on.
Press FUNCTIONS.
Select [To Others] with
Select [Setup] with
4:3
Select [Connection] with
On
Select the option [On] with
PAL
Press RETURN several times, in order to return to the television picture.
Video
Off

Progressive television picture

The progressive picture aspect ratio (height to width) is set to 16:9. DVD-Video with
SELECT TAB
a picture aspect ratio of 16:9 is properly displayed. However, video material with an
ENTER
RETURN
image page ratio of 4:3 is shown stretched from right to left. If it is possible to adjust
the picture aspect ratio on your television, select the setting [Progressive - On].
With a normal television, the progressive output can cause the picture to flicker,
even if the television is progressive-compatible.
Select the setting [Progressive - Off].
Progressive-compatible televisions (PAL)
LCD/plasma television or LCD projector
If progressive output is used, videos can be viewed
in High Resolution, for example from DVD-Video.
COMPONENT VIDEO OUT on this unit is
connected with the COMPONENT VIDEO IN on the
television. Select the [Progressive - On] setting.
COMPONENT
VIDEO OUT
COMPONENT VIDEO OUT
DVD Recorder
.
and confirm with ENTER.
and confirm with ENTER.
, [Progressive] with ,
and confirm with ENTER.
Y
P
B
P
R
Progressive output
COMPONENT
VIDEO IN
/P ) and the
B R
and confirm with ENTER.
Conventional televisions
On a normal television, Progressive output can
cause flickering even if the television is
Progressive-compatible. Select the [Progressive
- Off] setting.
COMPONENT
VIDEO OUT
Y
COMPONENT VIDEO OUT
P
B
P
R
Progressive output
COMPONENT
DVD Recorder
VIDEO IN
69
69
19