Picture And Sound Settings - Panasonic DMR-EX95V Operating Instructions Manual

Picture and sound settings

Play
Picture
Audio
Other
Downloaded From DvDPlayer-Manual.com Panasonic Manuals
Option Setting
Repeat Play
[On] [Off]
Option Setting
Playback NR
[On] [Off]
Progressive
[On] [Off]
Transfer
[Progressive - On]
Copy NR
[Automatic]
[On]
[Off]
Setting
Option
DVB Multi Audio
V.S.S.
[Natural]
[Emphasis]
[Off]
Dialog Enhancer
[On] [Off]
Option Setting Setting
Position
[1 - 5]
The function is only available if the elapsed time is displayed.
CD VCD
Track All Off
RAM -R
-R DL -RW(V) +R +R DL +RW
Title Chapter Off
DVD-A MP3
Track Group Off
During playback of a playlist
PL (Playlists) Off
If the Video-CD has playback control, select a track in STOP mode
with the number buttons.
Reduces screen interference.
Select [On] to activate full picture output.
Select the appropriate conversion method for full-picture output.
PAL output signal
[Auto] Film and video content is detected and converted appropriately.
[Video] If problems occur with the [Auto] setting.
[Film] Select Video or Film if the video content is is not displayed correct
with the Auto setting.
NTSC output signal
[Auto 1] Film and video content is detected and converted appropriately.
[Auto 2] Movies with different picture frequencies are converted
[Video] If content does not display correct with the [Auto 1] or [Auto 2]
settings.
Reduces noise during tape recording.
Only with picture input from a video cassette.
Noise reduction is activated for video input.
The input signal can be recorded unchanged.
If more than one audio channel is broadcast, you can set the desired
channel here (only applies to digital channels).
RAM -R -RW(V) +R +R DL +RW DVD-A DVD-V
-R DL
Surround sound effect with 2 front speakers. Only with Dolby Digital with
2 or more channels. Switch off V.S.S. if this causes problems. V.S.S. does
not work with recordings in dual-channel sound.
RAM -R
-R DL -RW(V) +R +R DL +RW DVD-A DVD-V
Dolby Digital, only with 3 or more channels, including a center channel.
The volume is increased so that dialogue is easier to understand.
Position of the OSD displays on the screen.
DVD
DVD-V -RW(VR) HDD
HDD RAM -RW(VR)
Only for AV1, AV2, AV3 or DV.
-RW(VR)
-RW(VR) DivX
HDD
77