Table of Contents
Advertisement
Problem solving guide
Message
lights up red in the
freezer section temper-
ature display and an
alarm also sounds.
64
Cause and remedy
The temperature alarm has been activated (see
"Temperature and door alarm"). The temperature in
the freezer section has risen higher or fallen lower
than the temperature set.
This could be due to:
– the freezer door being opened too often, or being
left open.
– a large quantity of fresh food being placed in the
freezer at once without switching on the Super
freeze function.
– an interruption to the power supply.
– a fault with the appliance.
Touch
in the display.
The alarm message is confirmed:
the alarm stops.
The start screen appears in the display: the warmest
temperature recorded in the freezer section will flash
for about 1 minute in the display. Then the temperat-
ure display will change to the current temperature in
the freezer section.
You can exit from the flashing temperature display
early:
Touch the temperature display for the freezer sec-
tion.
The warmest temperature display will go out. The dis-
play will then revert to showing the current temperat-
ure in the freezer section.
Rectify the cause of the alarm.
Depending on the temperature displayed, you
should check the condition of food in the freezer. If
it has defrosted or started to defrost, check that it
is still safe to use and, if so, use it as soon as pos-
sible. Defrosted food may only be re-frozen after it
has been cooked.
goes out and
Hide quick links:
Advertisement
Table of Contents
