Operation - ADJ Inno Pocket Spot LZR User Instructions

Inno Pocket Spot LZR
TILT
- Adjustment of the tilt position.
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that "TILT" is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
COLO
- Adjustment for the color wheel.
1. Press the ENTER button for at least 3 seconds, then press the UP
or DOWN buttons so that "COLO" is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
GOBO
- Adjustment of the gobo wheel.
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that "GOBO" is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
ADJ Products, LLC - www.adj.com - Inno Pocket Spot LZR Instruction Manual Page 20
Home Adjustment Menu Inno Pocket Spot LZR
Universal DMX Control:
sal DMX-512 controller to control the chases and patterns, dimmer
and strobe. A DMX controller allows you to create unique programs
tailored to your individual needs.
1. The Inno Pocket Spot LZR has 3 DMX channel modes; 12 chan-
nel mode, 13 channel mode, and 15 channel mode. See pages
24-32 for detailed description of the DMX values and traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-7 as well as the set-up specifications that are includ-
ed with your DMX controller.
3. Follow the instructions on page 15 to set the DMX channel mode
and DMX address.
4. Use the controller's faders to control the various DMX fixture traits.
This will allow you to create your own programs.
5. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
6. For extended help operating in DMX mode consult the manual
included with your DMX controller.
Sound Active Mode:
This mode allows either single unit or several
units linked together, to run to the beat of the music.
1. Press the MENU button until "SOUN" is displayed, and press
ENTER. Press the UP or DOWN buttons so that "ON" is dis-
played and press ENTER.
2. Press the MENU button until "SENS" is displayed, and press
ENTER. Use the UP and DOWN buttons to adjust the sound
sensitivity. Press ENTER when you have found your desired sensi-
tivity level.
Show Mode:
This mode allows either a single unit or several units
linked together, to run one of four shows that you choose.
1. Press the MENU button until "SHND" is displayed, and press
ENTER.
2. Press the UP or DOWN buttons until you find your desired show,
and press ENTER.
ADJ Products, LLC - www.adj.com - Inno Pocket Spot LZR Instruction Manual Page 21
This function allows you to use a univer-

Operation