ADJ Inno Pocket Spot LZR User Instructions page 10

Inno Pocket Spot LZR
LED -
With this function you can have the LED display
turn off after 10 seconds.
1. Press the MENU button until "LED" is displayed, press ENTER.
2. The display will show either "ON" or "OFF". Press the UP or
DOWN buttons to select "ON" to keep the LED display on at all
times, or "OFF" to switch to have the LED display switch off after 10
seconds.
3. Press ENTER to confirm. To make you LED display reappear again
press any button.
DISP -
This function will reverse the display 180º.
1. Press the MENU button until "DISP" is displayed, press ENTER.
2. Press ENTER to "flip" the display. Press ENTER to "flip" it again.
Press ENTER when you have made your desired setup.
TEST
- This function will run a self test program.
1. Press the MENU button until "TEST" is displayed, press ENTER.
2. The fixture will now run a self test.
TEMP
- This function will show you current running tem-
perature.
1. Press the MENU button until "TEST" is displayed, press ENTER.
2. The fixture will now run a self test.
FHRS
- With this function you can display the running
time of the unit.
1. Press the MENU button until "FHRS" is displayed, press ENTER.
2. The running time of the fixture will now be displayed. Press MENU
to exit.
ADJ Products, LLC - www.adj.com - Inno Pocket Spot LZR Instruction Manual Page 18
System Menu Inno Pocket Spot LZR
VER
the unit.
1. Press the either the MENU button until "VER" is displayed, press
ENTER.
2. The display will show the software version.
RSET
1. Press the MENU button until "RSET" is displayed, press ENTER.
2. The fixture will now reset.
Inno Pocket Spot L
To enter the home position adjustment menu, press the ENTER
button for at least 5 seconds. In this submenu you are able to adjust
the original position of the pan position, tilt position, color wheel posi-
tion, and gobo wheel position.
PAN
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that "PAN" is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
ADJ Products, LLC - www.adj.com - Inno Pocket Spot LZR Instruction Manual Page 19
- Use this function to display the Software version of
- Use this function to reset the unit.
- Adjustment of the pan position.
System Menu
Home Adjustment Menu