Troubleshooting - iHome iBT7 Instruction Manual

Unit doesn't respond (no power)
• Check that all connections are correct and properly plugged in.
• For internal battery operation, make sure the unit is fully charged.
• Make sure your device is properly paired with the iBT7.
• Make sure the Power is ON.
Unit doesn't respond
• If the unit appears to be "frozen" or locked up or hasn't been used in a long time, you may need to
reset it. To do so, use a straightened paper-clip, toothpick, or similar device to press the reset button
located under the water resistant gasket on the side of the unit. The blue LED indicator on the front of the
unit will flash rapidly 5 times to indicate the unit has been reset. If unit hasn't been used in a long time,
charge unit for a number of hours before attempting to reset.
Trouble pairing device with iBT7
Bluetooth implementation varies depending on your device's hardware and operating system. Please see
our website for updates on pairing.
• If pairing fails, try to pair again by powering on the unit then pressing and holding the Pairing Button
on the top of the unit for 2 seconds.
• Make sure your device is working properly. Check your device's manual for details on Bluetooth pairing
and linking.
For further information and to see the latest instructions, visit www.ihome.com/support
12

Troubleshooting