Using The Speakerphone Feature; Playing Audio Via Aux Line-In - iHome iBT7 Instruction Manual

Using the Speakerphone feature

NOTE: The unit must be powered on to receive a call. A Bluetooth phone must be linked.
1. When a call is received, playing music is muted to hear the ring tone. Press the
End Button to ignore it. For call waiting function, press the
or press the
call on hold and answer a new call; press the
2. When a call is completed, press the
Playing Audio via Aux In
1. Connect one end of the included 3.5mm stereo audio cable to the Aux in jack on the side of the unit under
the waterproof gasket and connect the other end to the headphone or line-out jack on your audio device.
Power Button on the unit to turn it on.
2. Press the
3. Power on the audio device and use the controls on the device to play or pause audio, and navigate
tracks.
4. Adjust the volume on the unit as described previously.
5. When done listening, press the
device, too.
Note: Do not play an aux-in device while a Bluetooth device is playing or you will hear both.
Mobile Phone PC/Tablet
End Button to end the call and resume previous function.
Power Button to turn the unit OFF. Remember to turn off your audio
Game Devices iPod Laptop MP3/MP4
Using the
Talk Button to switch between the calls.
8
iBT7
Talk Button to answer the call,
Talk Button to place a currently active