Econo Cool Operation; On/Off Timer - Mitsubishi Electric MSZ-GL06NA Operating Instructions Manual

● OPERATING INSTRUCTIONS ●
E
CONO COOL OPERATION
Press during COOL mode

ECONO COOL operation.

The unit performs swing operation vertically in various cycles according to the
temperature of airflow. Set temperature is set 4°F (2°C) higher automatically.
Press again to cancel ECONO COOL operation.
• ECONO COOL operation is also cancelled when the VANE button is
pressed.
What is "ECONO COOL"?
Swing airfl ow (change of airfl ow) makes you feel cooler than stationary airfl ow.
So, even though the set temperature is automatically set at 4°F (2°C) higher, it is
possible to perform cooling operation with keeping comfort. As a result, energy can
be saved.
T
IMER OPERATION (ON/OFF TIMER)
1
Press or
(ON timer) :
(OFF timer) : The unit turns OFF at the set time.
* or blinks.
* Make sure that the current time is set correctly.
2
Press (Increase) and
time of timer.
Each press increases or decreases the set time by 10 minutes.
• Set the timer while
3
Press or
Note:
• ON and OFF timers can be set together.
operations.
• If power failure occurs while ON/OFF timer is set, see
function".
En-7
JG79Y022H01_en.indd 7
page 5 to start
during operation to set the timer.
The unit turns ON at the set time.
Page 4
(Decrease) to set the
or is blinking.
again to cancel timer.
mark indicates the order of timer
page 5 "Auto restart
7/30/2015 7:57:06 PM