Basic Operation; Turning Power On; Channel Selection; Call Procedure - Icom IC-F43TR Instruction Manual

Turning power ON

q Rotate [VOL] to turn the power ON.
w If the transceiver is programmed for a start up passcode,
input the digit codes as directed by your dealer.
KEY
0 1
NUMBER
5 6
e
putting 4 digits, the input code number may be incorrect.
Turn the power off and start over in this case.

Channel selection

Push [UP] or [DOWN], or rotate [ROTARY SELECTOR]
to select the desired system channel or talk group, in se-
quence.
SELECTOR].
UP
2 3 4
7 8 9
-
[ROTARY

BASIC OPERATION

Call procedure

CTCSS and DTCS), the call procedure may be necessary
prior to voice transmission. The tone signalling employed may
be a selective calling system which allows you to call specific
station(s) only and prevent unwanted stations from contact-
ing you.
q Select the desired DTMF encode channel according to
w Push the [PTT].
e After transmitting a DTMF code, the remainder of your
communication can be carried out in the normal fashion.
Selective calling
3
Non-selective calling
8