INSTALLATION & OPERATION MANUAL
2. BELLHOUSING FIXING
-. Assemble exhaust pipe after tightening the
mounting bolts between bell housing and
transom plate. Use the following parts:
Mounting Bolt
Washer
Spacer
Fiber Washer
Nut
3. ASSEMBLING ENGINE MOUNTS
1) To prevent twisting the engine mount during
engine alignment, use a spanner on the lower
nut (
) to keep the bolt from turning while
adjusting the engine height by turning the
middle nut (
). Adjust the engine height until
the Hyundai SeasAll alignment tool can be
properly inserted.
2) After alignment, place washer (
engine support bracket and tighten lock nut
(
)while keeping the middle nut (
turning with a spanner.
U125 Series Engines
DON'T USE THE SPRING WASHER.
IF YOU USE SPRING WASHER, THE PROBLEM OF
ENGINE ALIGNMENT CAN BE OCCURRED.
) on top of
) from
-17-
WARNING