DTMF
Swap
When you are connected to two calls, you can switch to the
other calls.
During a call:
@
(Swap) to change to the other call.
DTMF can be sent during a conversation. These are often
used to access voice mail, paging and computerised home
banking. For example, you may need to enter a number to
remotely access voice mail messages. A phone number may
be stored in the Contacts together with a DTMF sequence,
allowing the number to be dialled upon recall and the DTMF
number to be sent automatically.
Send DTMF during a call:
Enter digits (
~
#
Pause dial
Using pauses allows you to send DTMF automatically.
1. Enter the phone number
2. Press and hold
the phone number entered
3. Enter DTMF digits after the pause, e.g. enter the number
to access voice mail messages
4.
C
When the call is connected the DTMF sequence will be
sent after 3 seconds.
,
or
).
,
!
"
until a "P" is displayed at the end of
#
Basic Operations
21