Voice Privacy; Personal Unblocking Key (Puk) Code; Application Settings; Network - Nokia 6275I User Manual

9251758_6275i_1_en_au_oth_v1.0.fm Page 61 Tuesday, August 22, 2006 10:24 PM
Change PIN code
Before you can change your PIN code,
you must enable PIN code request.
See "PIN code request", p. 59.
1. In standby mode, select
Settings > Security >
codes > Change PIN
2. Enter the current PIN code,
and select OK.
3. Enter the new PIN code, and select
OK.
4. Enter the new PIN code again,
and select OK.

Voice privacy

Voice privacy is a network service.
See "Network services", p. viii. If your
wireless service provider or network
operator supports this feature,
the voice privacy feature protects the
privacy of your current phone
conversation from other callers placing
phone calls on your same network.
In standby mode, select
Settings > Security > Voice privacy
On or Off.
Personal unblocking key
(PUK) code
The PUK code is used to restore a
blocked PIN code. The PUK code is 8
characters in length and cannot be
changed. The PUK code must be
obtained from your wireless service
provider or network operator.
Important: If you enter an
incorrect PUK code 10 times
in succession, the UIM card is
Menu >
rejected and can no longer be
Access
used. You must contact your
code.
wireless service provider or
network operator for a new
UIM card.

■ Application settings

To change game and application
settings, select
App. settings and one of the following:
Application sounds
during an application.
Application lights
defined or Default—Play lights during
an application.
Application vibration
the phone during an application.
Use of vibration can aggravate injuries.
Menu >
Do not turn vibration on if you have
>
any ailment in the bones or joints of
your fingers, hands, wrist, or arms.

■ Network

The menu options in your device
depend on your network operator's
network. Check with your network
operator for more information.
The Network menu enables you to
personalise the way your device
S e t t i n g s
Menu > Settings >
> On —Play sounds
> Application
> On—Vibrate
61