Connectivity - Nokia 6275I User Manual

9251758_6275i_1_en_au_oth_v1.0.fm Page 53 Tuesday, August 22, 2006 10:24 PM
Assign a voice tag to a
command
Before using voice commands, you must
first add a voice tag to the device
function.
1. Select Menu > Settings
commands.
2. Select the device function you
want to tag: Profiles, Messages,
Infrared, Voice recorder, or Log.
3. If necessary, select an option
associated with that function.
4. Select Start, and speak the voice
tag clearly into the microphone.
Do not select Quit unless you want
to cancel the recording.
The device replays and saves the
recorded tag. appears next to
commands with assigned voice tags.
Activate a voice command
After you have associated a voice tag
with a function in your device, to issue
a command, speak the voice tag.
1. In standby mode, press and hold
the right selection key or voice key.
2. With Speak now displayed,
pronounce the voice tag clearly into
the microphone.
With the voice tag found, the device
displays Found:, and plays the
recognised voice tag through the
earpiece. The function you requested is
activated.
Options
After you have associated a voice tag
to a command, you can select one of
the following options:
Play—Press the center selection key to
> Voice listen to the voice command tag.
Change—Select Options
change the voice command.
Delete—Select Options
erase the voice command tag.

■ Connectivity

You can connect the phone to a
compatible devices using infrared (IR)
connection, or Bluetooth wireless
technology. You can also connect the
phone to a compatible PC using IR or a
USB data cable; and use the phone as a
modem to enable connectivity from
the PC.
For more information, see the Nokia PC
Suite online help. Nokia PC Suite
and all related software can
be downloaded from
http://www.nokia-asia.com/pcsuite.
Important: Only install and
use applications and other
software from sources that
offer adequate security and
protection against harmful
software.
S e t t i n g s
> Change to
> Delete to
53