Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. The symbol indicates that dangerous voltages constituting a risk 6) Clean only with dry cloth. of electric shock are present within this unit.
Front and Rear Panel Illustration Remote Controller 1. Front panel STANDBY VIDEO MUTE INFO PAUSE MENU EXIT STANDBY Used to switch the set top box t o on or standb y. Standby Indicator: Used to visually show power state of the set top box, the green LED will show if turned on the set top box and the red LED will be light if the set top box entered standby mode.
Installing the Batteries Connections Remove the battery cover from the remote control and put 2xAAA size TV Aerial batteries inside the compartment. Amplifier The diagram inside the battery compartment shows the correct way to install the batteries. VOLUME INPUT SELECTOR POWER BYPASS PRO LOGIC...
User Interface 1.2.2 Manual Scan 1.Quick Installation Manual Scan adds the scanning results into database, it doesn't erase 1.1 Setting Country and Language the database. The User has to know the Frequency and Bandwidth User can select preferred country and language at Setup - Installation for scanning.
Page 7
2.2.2.1 TV Format Note: The default is OFF, set this option to only if this STB is Set display format for sizing screen, such as 4:3LB, 4:3PS, connected to an active antenna which amplifies the received RF signal, 16:9PB,16:9 FIT. otherwise please set it to OFF .
Page 8
2.2.4 Advance Timer (2) Press <OK> button to display program info and press it again to edit User can set timer for watching the program by date and time manually program name. or from the TV/Radio Guide(see section 2.3.2). When setting date and (3) Press <Up/Down/Left/Right/0~9/RED/GREEN>...
(5) Press <RED> button to enter Book page and <YELLOW> button to save 3.4 Program List after edit. If it conflicts with itself or other event, a conflict message will be Press <OK> button to display Program List with No., name and lock/ displayed.
Page 10
3.9 Subtitle Display the subtitle on screen, the style of subtitle may be different by 3.15 Message content provider. See Figure 11. There are some messages to inform user the current status of the STB. Press <Subtitle> button to display subtitle setting page. Press <Up/Down>...
Troubleshooting Specifications If you experience problems with this receiver or its installation, please read carefully the relevant sections of this User Manual and this Troubleshooting guide. This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of life separately from your household waste.