Maintenance; Play Timer; Sleep Timer; Sound Quality - Panasonic SC-EN33 Operating Instructions Manual

Timers and others
The SLEEP timer can turn the unit off after a set time.
Press [SLEEP] to turn the SLEEP function ON/OFF.
• Each time you press the button:
30 MIN 60 MIN 90 MIN
OFF (Canceled)
g To check the remaining time
Note
The play timer and sleep timer can be used together. The sleep timer always has
priority. Be sure not to overlap timer settings.

Sound quality

You can choose one of four types of sound quality.
Press [PRESET EQ] to select the sound quality.
• Each time you press the button:
HEAVY CLEAR
(Adds punch to rock) (Clarifies higher sounds)
EQ OFF (Canceled)
Live Virtualizer
You can create a three-dimensional sound field when listening to stereo sound.
Press [SURROUND] to turn the Live Virtualizer ON/OFF.
Note
The actual effect depends on the source played.
Specifications
g AMPLIFIER SECTION
FTC OUTPUT POWER both channel driven
simultaneously
10 % total harmonic distortion (THD)
1 kHz
RMS OUTPUT POWER both channel driven
simultaneously
10 % total harmonic distortion (THD)
1 kHz
Output impedance
HEADPHONE
MUSIC PORT
DC IN Jack
Terminal
Phone Jack
Terminal
Music Port Jack
Terminal
XM Ready XM Connect & Play Antenna Only
g TUNER SECTION
Frequency range
FM 87.9 MHz to 107.9 MHz (200 kHz)
87.5 MHz to 108.0 MHz (100 kHz)
AM 520 kHz to 1710 kHz (10 kHz)

Maintenance

If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this unit.
6
• Before using chemically treated cloth, read the instructions that came with the cloth
carefully.

Sleep timer

120 MIN
Press [SLEEP] once
EQ
SOFT
(For background music)
VOCAL (Adds gloss to vocals)
g CD SECTION
Disc played [8 cm (3") or 12 cm (5")]
(1) CD-Audio (CD-DA)
(2) CD-R/RW (CD-DA, MP3)
2.8 W per channel (3) MP3
1.8 W per channel Sampling frequency
CD
MP3
Bit rate
3 W per channel MP3
2 W per channel Decoding
Pick up
16 Ω to 32 Ω Wavelength
Laser power
14 kΩ
Audio Output (Disc)
Number of channels
14 V
Frequency response
Wow and flutter
3.5 mm stereo
Digital filter
3.5 mm stereo D/A converter
g GENERAL
Power supply
Power consumption
You can set the timer to come on at a certain time to wake you up.
Preparation:
Turn the unit on and set the clock.
Prepare the music source you want to listen to; disc, radio or music port source, and
set the volume.
 Press [CLOCK/TIMER] repeatedly to select play timer.
CLOCK Original display
zPLAY
 "ON TIME" is displayed. Within 5 seconds, press [2/u] or [1/i] to set
the starting time.
 Press [CLOCK/TIMER] to confirm.
 "OFF TIME" is displayed. Repeat steps 2 and 3 to set the finishing time.
To activate the timer
 Press [zPLAY] to turn on the timer.
 Press [^] to turn off the unit.
To
Change the settings
Change the source of volume
Check the settings (when the
unit is on or in standby mode)
Cancel
• The timer will start at the preset time, with the volume increasing gradually to the
preset level.
• The timer comes on at the set time every day if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while the timer is functioning, the finish time
setting will not be activated.
• When MUSIC PORT is selected as the source when the timer comes on, the
system turns on and engages MUSIC PORT as the source. If you wish to playback
from the portable audio equipment, activate the equipment's play mode and
increase the volume. (See the portable audio equipment's instruction manual.)
• When XM Satellite Radio is selected as the source and the timer comes on, the
system will play the last XM channel tuned before power off.
Dimensions (W x H x D)
Mass
44.1 kHz
32 kHz, 44.1 kHz, 48 kHz Operating temperature range
32 kbps to 384 kbps Operating humidity range
16/20/24 bit linear
g SPEAKER SECTION
785 nm Type
Speaker Unit (s)
CLASS 1
Impedance
2 channel
Input power
20 Hz to 20 kHz (+1, -2 dB)
Dimensions (W x H x D)
Below measurement limit
8
MASH (1 bit DAC)
Power consumption in standby mode:2.0 W (approx.)
AC 120 V, 60 Hz
Notes:
30 W
Specifications are subject to change without notice.
16 W
Mass and dimensions are approximate.
Care of the CD lens
• Clean the lens regularly to prevent malfunctions. Use a blower to remove dust and a
cotton swab if it is extremely dirty.
Recommended product: Lens cleaner kit (part no. SZZP1038C).
• Do not use the lens cleaner of the CD type.

Play timer

Action
Repeat steps 1 to 4 and 6.
 Press [zPLAY] to clear zPLAY indicator
from the display.
 Make changes to the source or volume.
 Perform steps 5 and 6.
Press [CLOCK/TIMER] repeatedly to select
zPLAY.
Press [zPLAY] to clear the timer
indicator from the display.
220 mm x 236 mm x 146 mm (8 21 / " x 9
32
With speakers 3.62 kg (7.98 Ibs)
3.33 kg (7.34 Ibs)
Without speakers 1.32 kg (2.91 Ibs)
1.26 kg (2.78 Ibs)
+5 °C to +35 °C
(+41 °F to +95 °F)
5 % to 90 % RH (no condensation)
1 Way, 1 Speaker system
Full range Speaker ") cone type 6 Ω
8 cm (5 1 /
2
121 mm x 236 mm x 146 mm (4 3 / " x 9
4
9 / " x 5 3 / ")
32 4
6 Ω
6 W (MAX)
9 / " x 5 3 / ")
32 4
7